Troubleshooting Canon Printer Error 6C10 with Best Canon Printer Support for UK

Canon Printer sometimes faces technical error that does not go until you call Canon Technical support number for help. If you are wondering about this particular error of Canon, then this article will help you. When this error strikes, your printer stops working and the system start displaying the error code 6C10 also known as CAM sensor error.

As soon as the error displayed, you can see the green light flash on pressing the button. After a time both the resume button and on button flashes alternately. It should be noted that unplugging and re-plugging the power and USB cables will not make any difference.

To resolve the error you may require checking the drivers updates. Follow the tutorial below to resolve this error completely.

Canon Printer Models That are Affected with This Error

Canon Printer Error 6C10 can appear in printer series MP110,MP550, MP560, MP540, MP600, MP610, MP630, MP800, MP810, MP830, MP970, MP980, MP620, MP640, IP3600, MP990, MG5200, MG5300, MG6100, MG6200, MG8100, MG8200 models of Canon Printer.

What is this Canon Printer Error 6C10?

Error 6C10 is generally occurs either due to a “Reset Canon Printer ink absorber” error or a “Valve Cam Sensor” error. Some of the user doesn’t know as well where the valve cam sensor is located therefore you require tech expert’s assistance to locate the sensor. It is said the sensor could be blocked by paper debris but technicians have the way of letting you know the exact location.

There is also a foam strip running almost the full width inside the printer and seems like 95% is clean. Non tech user cannot recognize that’s the “ink absorber” hence you need expert guidance to locate it. There is a button-push sequence designed to place the iP4600 into service mode as well where you can reset the ink absorber but so far this has been done nothing.

Follow Steps to Fix Error 6C10 on Canon Printer

Based on the users experience we have listed three verified solutions to fix Canon Printer Error 6C10. Please follow the steps accordingly or Contact Canon Printer UK for any help.

Solution 1:

Step 1: You need to move the print head to the center.

Step 2: Disconnect the printer and check on the right: is the purge unit ok? No piece of paper?

Solution 2:

Step 1: Do a reset of the printer.

Step 2: Power on

Step 3: Hold down the “Resume” button (triangle in a circle) for 15 to 20 seconds.

Solution 3:

Step 1: Switch off the printer.

Step 2: Open the door.

Step 3: Power on.

Step 4: When the cartridge is in the center, close the door.

Solution 4:

Step 1: Open the lid and allow the ink cartridge carrier to center itself.

Step 2: Locate a row of white rollers behind the carrier.

Step 3: At the end of the rollers there is a small, clear piece of plastic that sticks up. You need to wipe all of the ink off this piece of plastic using a paper towel.

Step 4: Towards the printer front there is a small square, which is about 1/2 inch per side that is a small foam pad. This is where the excess ink is collected.

Step 5: Take small piece of paper towel and press into the foam. Repeat this until the paper towel is no longer collecting the ink. Close the lid, turn off the printer and then turn it back on.

Communicate with Canon Customer Support Number UK to fix Error 6C10 Canon Printer

If you are confused about the solution steps above you can connect to technicians. To connect with our qualified, skilled, capable and experienced tech experts you need to call on Canon Printer Phone Number UK any hour of day and night. Our tech engineers are available 24*7 to assist you around the clock. You can also communicate with technicians via dropping an email to customer support email id address or can have live chat with tech professional from anywhere as per your requirement and needs.

Just note down our Canon Printer Helpline Number UK - +1-800-436-0509 (USA/Canada), +44-800-046-5700 (UK) and+61-1800-769-903 (AUS) Toll Free.

Disclaimer: We are an independent provider of remote technical support for software and peripheral devices. We have no affiliation with any of third-party companies unless such relationship is expressly specified. We collect information from the user but we never share the information to other parties. This information is so valuable for us. The use of any third party trademarks, logos, or brand names is for informational purposes only, and does not imply an endorsement by us or vice versa. If you find any kind of deceitful things present on our website then please inform us.